STEP 01 Level Pad & Bottom Chassis Alignment
Place the bottom steel chassis on a ±0 mm laser-leveled concrete pad or workshop jig. Check diagonal squareness (L1 = L2 within ±2 mm) before tightening anchor points.
DOC: SC-ENG-05 · WORKSHOP & DEALER ENGINEERING TOOL
Steel Frame Kit Assembly Manual & Sandwich Panel / Betopan BOM Calculator
Official 6-step bolt-together workshop assembly manual for our 72 Flat & Gable (A-Roof) steel frame kits, paired with an interactive 18-dimension cladding & floor board estimator.
6-STEP BOLT-TOGETHER SEQUENCE · ZERO WELDING REQUIRED
Workshop & On-Site Steel Frame Assembly Sequence (SC-ENG-05)
STEP 02 16 mm Non-Combustible Betopan Floor Decking
Lay 16 mm cement-bonded Betopan boards (1250 × 2500 mm standard sheets) across bottom cross-purlins and fasten with self-drilling countersunk screws every 250 mm.
STEP 03 Corner & Intermediate Column Bolting (M12)
Erect the 4 corner columns (plus 2–4 intermediate columns on ≥8 m frames). Fasten to bottom corner nodes using Grade 8.8 M12 galvanized bolts at ~50% snug torque initially.
STEP 04 Top Chassis / Gable A-Roof Truss Placement
Lower the top perimeter chassis (or pitched A-roof truss assembly + ridge purlins) onto column heads using an overhead crane or forklift spreader, then torque all M12 structural bolts to 100%.
STEP 05 1000 mm Modular Sandwich Panel Insertion
Slide 40–80 mm wall sandwich panels (1000 mm net coverage width; cut length 2580 mm Flat / 2480 mm Gable) into U-channels with neutral EPDM/polyurethane sealant at every tongue-and-groove joint.
STEP 06 Roof Cladding, Doors/Windows & Corner Flashings
Install roof sandwich panels (or galvanized roof sheet + 80–125 mm wool blanket), frame out 900×2000 mm doors & 990×1000 mm uPVC windows, and rivet exterior corner/drip flashings.
18 STANDARD DIMENSIONS · PURE ENGINEERING QUANTITIES
Interactive Sandwich Panel (1000 mm) & Betopan (16 mm) BOM Calculator
Calculate exact wall panel m², roof panel m², 1000 mm modular panel piece counts, and 1250×2500 mm Betopan floor boards for any SerContainer steel frame kit. Optional local cost fields let dealers simulate local cladding cost.
Explore All 5 Commercial & B2B Programs
Dealership & Distributorship →
Corporate Supply, Dealership & Project Engineering Solutions
0% Fee
Dealership & Distributorship
0% Franchise / Royalty Fee · Domestic & Global Distributorship
View Specs & Plan →
16–28 Sets
Wholesale & Fleet Supply
Full-Truckload (13.6m TIR / 40' HC) · OEM & Heavy-Duty Rental Fleet Spec
View Specs & Plan →
1–2 Storeys
Camp & Multi-Storey Projects
Coupled & 2-Storey Modular Complexes · EPC, Mining & Energy Camps
View Specs & Plan →
8–10 Units
Flat-Pack Export System
Package A: 8–10 Complete Units/TIR · Package B: 16–28 Steel Frame Kits/TIR
View Specs & Plan →
3–7 / 5–10 Days
Public Tenders & Relief Supply
Municipalities, Ministries, UN / NGOs & Emergency Relief Housing
View Specs & Plan →
FAQ · SerContainer
Frequently Asked Technical & Export Questions
What is the minimum order quantity (MOQ) for container frame kits?
For 3×7 m Galvanized container frame kits (FR-G-W3000-L7000 and GR-G-W3000-L7000), the minimum order is 10 sets per model. For all other 70 frame kit models (including 3×7 m Painted and all other dimensions), the minimum order is 20 sets per model. Mixed-model combinations are not accepted toward MOQ.
Is there a minimum order requirement for ready modular containers (SC-K, SC-MK, SC-GK, SC-IK)?
No. Ready modular containers (accommodation units, site offices, security cabins, and WC/shower sanitary containers) can be ordered starting from 1 unit up to multi-unit construction camp packages.
How many container frame kits or ready containers fit into a 13.6m Truck (TIR) or 40' HC Sea Container?
For bolt-together demountable frame kits (such as 2.4×6 m or 3×7 m), a single 13.6m flatbed/curtain-side truck or 40' HC container holds approximately 20 to 28 sets depending on total weight and roof geometry. For factory-assembled 3×7 m ready containers, 1 truck carries 2 monoblock units (or 4–6 compact guard/sanitary cabins); for multi-unit export projects shipped in flat-pack configuration, 1 truck or 40' HC carries 6 to 10 units.
What is the difference between Flat Roof and Gable (A) Roof frame kits?
Flat Roof frame kits have a 2,600 mm external height and standard chassis/roof purlin structure. Gable (A) Roof frame kits feature 2,500 mm vertical side walls and dual-pitched steel roof trusses reaching a 2,850 mm ridge height, designed for rapid rainwater/snow runoff and residential aesthetics.
Do you offer Rockwool or PIR insulation and A/C preparation for Middle East & Gulf projects?
Yes. While our standard ready containers feature EPS insulated wall panels, you can select the "Hot Climate & Camp Option" in our quote calculator to upgrade to fire-rated Rockwool or high-density PIR panels, reinforced roof insulation, and pre-wired split A/C provisions for Iraq, Saudi Arabia, UAE, Qatar, Kuwait, and North Africa projects.
What is included in a container frame kit and what is excluded?
Each frame kit includes the bottom chassis perimeter beams, top roof perimeter frame, intermediate floor/roof purlins, 4 or 6 load-bearing corner columns, gable roof trusses/ridge beams (on A-roof models), lifting lugs, and the complete bolt/nut/washer fastener set. Wall panels, roof cladding sheets, floor boards, doors, windows, and site assembly are excluded from the frame-only kit.